MESSAGE
| DATE | 2020-05-17 |
| FROM | Yusif Suleiman
|
| SUBJECT | Subject: [Hangout - NYLXS] [Health] Fw: Tryton-server
|
From hangout-bounces-at-nylxs.com Sun May 17 17:30:32 2020
Return-Path:
X-Original-To: archive-at-mrbrklyn.com
Delivered-To: archive-at-mrbrklyn.com
Received: from www2.mrbrklyn.com (www2.mrbrklyn.com [96.57.23.82])
by mrbrklyn.com (Postfix) with ESMTP id A06BD163FED;
Sun, 17 May 2020 17:30:06 -0400 (EDT)
X-Original-To: hangout-at-www2.mrbrklyn.com
Delivered-To: hangout-at-www2.mrbrklyn.com
Received: by mrbrklyn.com (Postfix, from userid 1000)
id D01B1163FE9; Sun, 17 May 2020 17:29:59 -0400 (EDT)
Resent-From: Ruben Safir
Resent-Date: Sun, 17 May 2020 17:29:59 -0400
Resent-Message-ID: <20200517212959.GA26090-at-www2.mrbrklyn.com>
Resent-To: hangout-at-mrbrklyn.com
X-Original-To: ruben-at-mrbrklyn.com
Delivered-To: ruben-at-mrbrklyn.com
Received: from lists.gnu.org (lists.gnu.org [209.51.188.17])
by mrbrklyn.com (Postfix) with ESMTP id A4775163F9A
for ; Sun, 17 May 2020 12:28:37 -0400 (EDT)
Received: from localhost ([::1]:43810 helo=lists1p.gnu.org)
by lists.gnu.org with esmtp (Exim 4.90_1)
(envelope-from )
id 1jaM9U-00062y-JC
for ruben-at-mrbrklyn.com; Sun, 17 May 2020 12:28:36 -0400
Received: from eggs.gnu.org ([2001:470:142:3::10]:52916)
by lists.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256)
(Exim 4.90_1) (envelope-from )
id 1jaLqD-0000wJ-2W
for health-at-gnu.org; Sun, 17 May 2020 12:08:42 -0400
Received: from mail-oln040092064036.outbound.protection.outlook.com
([40.92.64.36]:28739 helo=EUR01-DB5-obe.outbound.protection.outlook.com)
by eggs.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256)
(Exim 4.90_1) (envelope-from )
id 1jaLqA-0003AQ-Uc
for health-at-gnu.org; Sun, 17 May 2020 12:08:40 -0400
ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none;
b=UCweA6r6IPZTEB55jpgdw8+4wmWZ+1Xs428levqIXkE0+73bKmP8KvN/oYcq/ynwSssKJZRR3e2rv+D7Cubx0xev71r/HEsDOriEBKbcP0Bcwcs2v3pnY1ASijIiG/34FGnSn4DL17siSv/dK680baz1N1pG7EHoqab6Tx+UkK5Qdz44J8xp5i3xH0AYj+R4K01QaOEeA2+IilBi28EoQxrP1S3FI01vX8vnKyhWWckx4J2uVjnLWotE0hYyn+Vf6vgLZnZKEvTjuk9S0TW7x/vupnfq4zrDtNlPO4f2EJeJaYKweeLCiTX3FbinaiQsDko4L22sToOkypJhXCffFA==
ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com;
s=arcselector9901;
h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck;
bh=TwEk8u87GkbQahcZB7/JsELIDI1n+7Z9Pxew/RRD/tA=;
b=btGGodJHyFVoJGeGu9dWG5oXl4mB1drx+cV6hxYBXIZPIEggoZ7jLx0EnRSj1DsN4DfGhTSpSKSs5pEy50LeKGVDk7n+8b94p2sD6oo0qeSCC/EzQN/036NDUmSUQOZVnFdATA3xs4pyG6ZH0QYpsXRi9QT1wzRigrYDCaMB+VfsYS11kJBz/TwZMJqVUK5TTG6BJfb+tkfRbpzitrnjw1LbZsav4A15gmJEUmHm8Tp5vvzSbqvLmlZAqCsX8nb+cUCXLdAY2mB7ge1XlFZiYo0HwraIZkJBJutvTW3VZ0A50AfXwIL7zjOicyfYPdmWlzLSrNyhCwsylSYcR+qCGw==
ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=none; dmarc=none;
dkim=none; arc=none
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=hotmail.com;
s=selector1;
h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck;
bh=TwEk8u87GkbQahcZB7/JsELIDI1n+7Z9Pxew/RRD/tA=;
b=uYSgm6A0DpNVoE8FJnXVtcIGa8QHEUdyoaRC4HZyiX8D/n+nsKq8aIWhXCoVjZanktEvQX/ur47CH8O0b2kz8iDQFsxM5Iayee2NV5E2715rZSdlL2nWvOu5NlZBN/GPUxRdKEFokKBqASZbX4QA5L2UQvkG5Tgods7rND2OOMmUsS2EuOfADfeI3yRposRLWNtnfRkrzXgHrplhEpN2GCqgQShd5mtM7067NUyp4VUptgH8bA9Jf16xnCDp1Z//MgohA5v/jODEcxxAZ8ZJxU29fg+A3IyEKcCvGOORhItAw5460cefGsLHL2IQPh1L0Ro6nTAm71333s81y+JY4Q==
Received: from DB5EUR01FT050.eop-EUR01.prod.protection.outlook.com
(2a01:111:e400:7e1a::52) by
DB5EUR01HT223.eop-EUR01.prod.protection.outlook.com (2a01:111:e400:7e1a::372)
with Microsoft SMTP Server (version=TLS1_2,
cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.3000.19; Sun, 17 May
2020 15:53:32 +0000
Received: from AM6PR04MB6133.eurprd04.prod.outlook.com
(2a01:111:e400:7e1a::4b) by DB5EUR01FT050.mail.protection.outlook.com
(2a01:111:e400:7e1a::338) with Microsoft SMTP Server (version=TLS1_2,
cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.3000.19 via Frontend
Transport; Sun, 17 May 2020 15:53:32 +0000
Received: from AM6PR04MB6133.eurprd04.prod.outlook.com
([fe80::f85e:bb8e:ab1f:1dfe]) by AM6PR04MB6133.eurprd04.prod.outlook.com
([fe80::f85e:bb8e:ab1f:1dfe%6]) with mapi id 15.20.3000.022; Sun, 17 May 2020
15:53:32 +0000
From: Yusif Suleiman
To: "health-at-gnu.org"
Thread-Topic: Tryton-server
Thread-Index: AQHWKrtQNVOM8TIO20mvsXhhjCVboaipJ1aAgAABwzKAAB1XAIADIE1jgAAHZ4CAAACVCg==
Date: Sun, 17 May 2020 15:53:32 +0000
Message-ID:
References:
<3688526.GQry6WjoCA-at-x1e>
,
<2990153.9ZPglZkJxP-at-southpole>
In-Reply-To: <2990153.9ZPglZkJxP-at-southpole>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-incomingtopheadermarker: OriginalChecksum:5099F369B6E0DAF633E2D7B9B805F9A7D51C553260861EBCF86F47C28B0C50FF;
UpperCasedChecksum:B5EA181E5A215D7CD84375AB1AD1D3019DDCDE8F0129AB8FE81F472076873B55;
SizeAsReceived:7006; Count:45
x-ms-exchange-messagesentrepresentingtype: 1
x-tmn: [ucLq8tkA54gAlJ9AMkPNTPPir3OF6gWt]
x-ms-publictraffictype: Email
x-incomingheadercount: 45
x-eopattributedmessage: 0
x-ms-office365-filtering-correlation-id: 570adb05-bd36-4556-ec75-08d7fa7a7343
x-ms-traffictypediagnostic: DB5EUR01HT223:
x-microsoft-antispam: BCL:0;
x-microsoft-antispam-message-info: 37E2Qa9Gb8xkGWauj3pg00ntCvVXUA3ypoeHVgbY6BVdIkXfCN1gqTOt5qoIPbJwfdqB96XQd6EdEhMtcD2T9bdi2OOPTrY8FqVYJnCUBecp2B/GknnD1+k+Lrcbu87orn5++5ADUa2pCjms4MxgynO0OkkotPhDy+HILWU4eT/OCAvKf5fzvvmwkZETwahWgFnzF3ZZI7e2BEmK2RkY0kCLBlTMYfrN3WFHe61li1mFJDqctJL/DxKSwPSQCuI2
x-forefront-antispam-report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:0; SRV:;
IPV:NLI; SFV:NSPM;
H:AM6PR04MB6133.eurprd04.prod.outlook.com; PTR:; CAT:NONE;
SFTY:; SFS:; DIR:OUT; SFP:1901;
x-ms-exchange-antispam-messagedata: 8/XBKqH24n8h9RvFPaBOgRxpGrBiuCdg1F4pQLUOoXF+3FnJH675ZPtYcmaJm7xNTCqWZpseGZlB5cn6ClVOHX6zx0l+X2J7/trEuhcSduQqc600tcqYZSw4O7GiOvNAySmFfyRHCmmLgJWbCbN78w==
x-ms-exchange-transport-forked: True
MIME-Version: 1.0
X-OriginatorOrg: hotmail.com
X-MS-Exchange-CrossTenant-RMS-PersistedConsumerOrg: 00000000-0000-0000-0000-000000000000
X-MS-Exchange-CrossTenant-Network-Message-Id: 570adb05-bd36-4556-ec75-08d7fa7a7343
X-MS-Exchange-CrossTenant-rms-persistedconsumerorg: 00000000-0000-0000-0000-000000000000
X-MS-Exchange-CrossTenant-originalarrivaltime: 17 May 2020 15:53:32.2240 (UTC)
X-MS-Exchange-CrossTenant-fromentityheader: Internet
X-MS-Exchange-CrossTenant-id: 84df9e7f-e9f6-40af-b435-aaaaaaaaaaaa
X-MS-Exchange-Transport-CrossTenantHeadersStamped: DB5EUR01HT223
Received-SPF: pass client-ip=40.92.64.36;
envelope-from=yusifsuleiman-at-hotmail.com;
helo=EUR01-DB5-obe.outbound.protection.outlook.com
X-detected-operating-system: by eggs.gnu.org: First seen = 2020/05/17 12:08:36
X-ACL-Warn: Detected OS = Windows NT kernel [generic] [fuzzy]
X-Spam_score_int: -27
X-Spam_score: -2.8
X-Spam_bar: --
X-Spam_report: (-2.8 / 5.0 requ) BAYES_00=-1.9, DKIM_SIGNED=0.1,
DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, DKIM_VALID_EF=-0.1, FREEMAIL_FROM=0.001,
HTML_MESSAGE=0.001, RCVD_IN_DNSWL_LOW=-0.7, RCVD_IN_MSPIKE_H2=-0.001,
SPF_HELO_PASS=-0.001, SPF_PASS=-0.001,
URIBL_BLOCKED=0.001 autolearn=_AUTOLEARN
X-Spam_action: no action
X-Mailman-Approved-At: Sun, 17 May 2020 12:28:29 -0400
X-BeenThere: health-at-gnu.org
X-Mailman-Version: 2.1.23
Precedence: list
Subject: [Hangout - NYLXS] [Health] Fw: Tryton-server
X-BeenThere: hangout-at-nylxs.com
List-Id: NYLXS Tech Talk and Politics
List-Unsubscribe: ,
List-Archive:
List-Post:
List-Help:
List-Subscribe: ,
Reply-To: General GNU Health discussion and help
Content-Type: multipart/mixed; boundary="===============0133080285=="
Errors-To: hangout-bounces-at-nylxs.com
Sender: "Hangout"
--===============0133080285==
Content-Language: en-US
Content-Type: multipart/alternative;
boundary="_000_AM6PR04MB61333B6B8A82EE0BD5DA17E1BBBB0AM6PR04MB6133eurp_"
--_000_AM6PR04MB61333B6B8A82EE0BD5DA17E1BBBB0AM6PR04MB6133eurp_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi ALL,
Please, kindly help me to resolve tryton client application not connecting =
to server.
I am new to OpenSUSE and GNU Health.
I followed tutorials/documentation to install GNUHealth on OpenSUSE using v=
irtual box machine.
Everything goes fine until I came to lunch tryton_client, then it refused t=
o connect to the server.
Below are my previous threads on the issue.
Regards.
>
> 1) use the latest GNU Health and enjoy additional functionality, as
> described in https://en.opensuse.org/GNUHealth_on_openSUSE#Quick_Start
> (as you have already GH installed, after adding the respository you need =
to
> run
> zypper up --allow-vendor-change )
> It seem "version 3.4.1" is the updated version of leap 15.1, but I run th=
e
> "zypper up --allow-vendor-change" command.
>
> 2) If you install the client in the same virtualbox, can this client conn=
ect
> to the server?
> I am installing both client/server in VBox, am not sure if they will
> communicate. Please, advise me (I am new to Linux/OpenSUSE).
>
> 3) In order to allow the server inside a virtual machine to receive
> connecion requests from a client outside of that machine yo need to:
>
> 3.1) open port 8000 in the firewall (or switch it off *for testing purpos=
es
> only*). Use the firewall module in YaST.
> I try using NAT> Advance> Port forwarding to add 'port8000' in VBOX
> settings, which later I switch off the FIREWALL in YaST.
>
> 3.2) Set the network mode of the virtual box to 'Bridged' (normally VBox
> uses NAT as network mode, so the server receives a local address and is n=
ot
> visible from the outside. In bridged mode, it gets an address from the
> DHCP-server in the network)
> I change the 'NAT' as network mode in VBOX settings to "Bridged Adapter"
> mode.
>
> Please try the above and report back!
> I review the status of Postgresql Database and Tryton server, all are in
> active mode. But when I lunch the "Tryton client" application and click t=
he
> profile manager (after a while), Still it display "Could not connect to t=
he
> server"
>
> Please, can I share my screen?
>
> Regards,
> Yusuf
>
>
> ________________________________
> From: Axel Braun
> Sent: Friday, May 15, 2020 4:31 PM
> To: Yusif Suleiman ; health-at-gnu.org
> Subject: Re: Tryton-server
>
> **** please ask via health-at-gnu.org *****
>
> Am Freitag, 15. Mai 2020, 15:58:30 CEST schrieb Yusif Suleiman:
>
> [...]
>
> > OK...so what versions of GNU Health do you use? What is your base syste=
m,
> > and are client and server o the same machine?
> >
> > >>>>>>> Am installing gnuhealth client version 3.4., and I am using
> > >>>>>>> Windows
> > >>>>>>> base systems with virtual box 4GB RAM & 20GB HDD.
>
> 1) use the latest GNU Health and enjoy additional functionality, as
> described in https://en.opensuse.org/GNUHealth_on_openSUSE#Quick_Start
> (as you have already GH installed, after adding the respository you need =
to
> run
> zypper up --allow-vendor-change )
>
> 2) If you install the client in the same virtualbox, can this client conn=
ect
> to the server?
>
> 3) In order to allow the server inside a virtual machine to receive
> connecion requests from a client outside of that machine yo need to:
>
> 3.1) open port 8000 in the firewall (or switch it off *for testing purpos=
es
> only*). Use the firewall module in YaST.
>
> 3.2) Set the network mode of the virtual box to 'Bridged' (normally VBox
> uses NAT as network mode, so the server receives a local address and is n=
ot
> visible from the outside. In bridged mode, it gets an address from the
> DHCP-server in the network)
>
> > >>>>>>> I have two
> > >>>>>>> computers to which I want to connect as client and server for
> > >>>>>>> testing purpose (before implementing in real environment).>
>
> Please try the above and report back!
>
> Best,
> Axel
--
Dr.-Ing. Axel K. Braun
M: +49.173.7003.154
T: -at-coogor
Matrix: -at-docb:matrix.org
PGP Fingerprint: 2E7F 3A19 A4A4 844A 3D09 7656 822D EB64 A3BA 290D
Public Key available at http://www.axxite.com/axel.braun-at-gmx.de.asc
Personal Freedom starts with free/libre Software....
...running openSUSE Leap 15.1
--_000_AM6PR04MB61333B6B8A82EE0BD5DA17E1BBBB0AM6PR04MB6133eurp_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
1">
color: rgb(0, 0, 0);">
Hi ALL,
Please, kindly help me to resolve tryton client ap=
plication not connecting to server.
I am new to OpenSUSE and GNU Health.
I followed tutorials/documentation to install GNUH=
ealth on OpenSUSE using virtual box machine.
Everything goes fine until I came to lunch tryton_=
client, then it refused to connect to the server.
Below are my previous threads on the issue.
Regards.
> > 1) use the latest GNU Health and enjoy additional functionality, as >
> described in Quick_Start">
https://en.opensuse.org/GNUHealth_on_openSUSE#Quick_Start
> (as you have already GH installed, after adding the respository you ne=
ed to
> run
> zypper up --allow-vendor-change )
> It seem "version 3.4.1" is the updated version of leap 15.1,=
but I run the
> "zypper up --allow-vendor-change" command.
>
> 2) If you install the client in the same virtualbox, can this client c=
onnect
> to the server?
> I am installing both client/server in VBox, am not sure if they willr>
> communicate. Please, advise me (I am new to Linux/OpenSUSE).
>
> 3) In order to allow the server inside a virtual machine to receive>
> connecion requests from a client outside of that machine yo need to:r>
>
> 3.1) open port 8000 in the firewall (or switch it off *for testing pur=
poses
> only*). Use the firewall module in YaST.
> I try using NAT> Advance> Port forwarding to add 'port8000' in V=
BOX
> settings, which later I switch off the FIREWALL in YaST.
>
> 3.2) Set the network mode of the virtual box to 'Bridged' (normally VB=
ox
> uses NAT as network mode, so the server receives a local address and i=
s not
> visible from the outside. In bridged mode, it gets an address from the=
> DHCP-server in the network)
> I change the 'NAT' as network mode in VBOX settings to "Bridged A=
dapter"
> mode.
>
> Please try the above and report back!
> I review the status of Postgresql Database and Tryton server, all are =
in
> active mode. But when I lunch the "Tryton client" applicatio=
n and click the
> profile manager (after a while), Still it display "Could not conn=
ect to the
> server"
>
> Please, can I share my screen?
>
> Regards,
> Yusuf
>
>
> ________________________________
> From: Axel Braun <axel.braun-at-gmx.de>
> Sent: Friday, May 15, 2020 4:31 PM
> To: Yusif Suleiman <yusifsuleiman-at-hotmail.com>; health-at-gnu.orgr>
> <health-at-gnu.org> Subject: Re: Tryton-server
>
> **** please ask via health-at-gnu.org *****
>
> Am Freitag, 15. Mai 2020, 15:58:30 CEST schrieb Yusif Suleiman:
>
> [...]
>
> > OK...so what versions of GNU Health do you use? What is your base=
system,
> > and are client and server o the same machine?
> >
> > >>>>>>> Am installing gnuhealth client versi=
on 3.4., and I am using
> > >>>>>>> Windows
> > >>>>>>> base systems with virtual box 4GB RA=
M & 20GB HDD.
>
> 1) use the latest GNU Health and enjoy additional functionality, as>
> described in Quick_Start">
https://en.opensuse.org/GNUHealth_on_openSUSE#Quick_Start
> (as you have already GH installed, after adding the respository you ne=
ed to
> run
> zypper up --allow-vendor-change )
>
> 2) If you install the client in the same virtualbox, can this client c=
onnect
> to the server?
>
> 3) In order to allow the server inside a virtual machine to receive>
> connecion requests from a client outside of that machine yo need to:r>
>
> 3.1) open port 8000 in the firewall (or switch it off *for testing pur=
poses
> only*). Use the firewall module in YaST.
>
> 3.2) Set the network mode of the virtual box to 'Bridged' (normally VB=
ox
> uses NAT as network mode, so the server receives a local address and i=
s not
> visible from the outside. In bridged mode, it gets an address from the=
> DHCP-server in the network)
>
> > >>>>>>> I have two
> > >>>>>>> computers to which I want to connect=
as client and server for
> > >>>>>>> testing purpose (before implementing=
in real environment).>
>
> Please try the above and report back!
>
> Best,
> Axel
--
Dr.-Ing. Axel K. Braun
M: +49.173.7003.154
T: -at-coogor
Matrix: -at-docb:matrix.org
PGP Fingerprint: 2E7F 3A19 A4A4 844A 3D09 7656 822D EB64 A3BA 290D
Public Key available at asc">http://www.axxite.com/axel.braun-at-gmx.de.asc
Personal Freedom starts with free/libre Software....
...running openSUSE Leap 15.1
--_000_AM6PR04MB61333B6B8A82EE0BD5DA17E1BBBB0AM6PR04MB6133eurp_--
--===============0133080285==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Hangout mailing list
Hangout-at-nylxs.com
http://lists.mrbrklyn.com/mailman/listinfo/hangout
--===============0133080285==--
--===============0133080285==
Content-Language: en-US
Content-Type: multipart/alternative;
boundary="_000_AM6PR04MB61333B6B8A82EE0BD5DA17E1BBBB0AM6PR04MB6133eurp_"
--_000_AM6PR04MB61333B6B8A82EE0BD5DA17E1BBBB0AM6PR04MB6133eurp_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi ALL,
Please, kindly help me to resolve tryton client application not connecting =
to server.
I am new to OpenSUSE and GNU Health.
I followed tutorials/documentation to install GNUHealth on OpenSUSE using v=
irtual box machine.
Everything goes fine until I came to lunch tryton_client, then it refused t=
o connect to the server.
Below are my previous threads on the issue.
Regards.
>
> 1) use the latest GNU Health and enjoy additional functionality, as
> described in https://en.opensuse.org/GNUHealth_on_openSUSE#Quick_Start
> (as you have already GH installed, after adding the respository you need =
to
> run
> zypper up --allow-vendor-change )
> It seem "version 3.4.1" is the updated version of leap 15.1, but I run th=
e
> "zypper up --allow-vendor-change" command.
>
> 2) If you install the client in the same virtualbox, can this client conn=
ect
> to the server?
> I am installing both client/server in VBox, am not sure if they will
> communicate. Please, advise me (I am new to Linux/OpenSUSE).
>
> 3) In order to allow the server inside a virtual machine to receive
> connecion requests from a client outside of that machine yo need to:
>
> 3.1) open port 8000 in the firewall (or switch it off *for testing purpos=
es
> only*). Use the firewall module in YaST.
> I try using NAT> Advance> Port forwarding to add 'port8000' in VBOX
> settings, which later I switch off the FIREWALL in YaST.
>
> 3.2) Set the network mode of the virtual box to 'Bridged' (normally VBox
> uses NAT as network mode, so the server receives a local address and is n=
ot
> visible from the outside. In bridged mode, it gets an address from the
> DHCP-server in the network)
> I change the 'NAT' as network mode in VBOX settings to "Bridged Adapter"
> mode.
>
> Please try the above and report back!
> I review the status of Postgresql Database and Tryton server, all are in
> active mode. But when I lunch the "Tryton client" application and click t=
he
> profile manager (after a while), Still it display "Could not connect to t=
he
> server"
>
> Please, can I share my screen?
>
> Regards,
> Yusuf
>
>
> ________________________________
> From: Axel Braun
> Sent: Friday, May 15, 2020 4:31 PM
> To: Yusif Suleiman ; health-at-gnu.org
> Subject: Re: Tryton-server
>
> **** please ask via health-at-gnu.org *****
>
> Am Freitag, 15. Mai 2020, 15:58:30 CEST schrieb Yusif Suleiman:
>
> [...]
>
> > OK...so what versions of GNU Health do you use? What is your base syste=
m,
> > and are client and server o the same machine?
> >
> > >>>>>>> Am installing gnuhealth client version 3.4., and I am using
> > >>>>>>> Windows
> > >>>>>>> base systems with virtual box 4GB RAM & 20GB HDD.
>
> 1) use the latest GNU Health and enjoy additional functionality, as
> described in https://en.opensuse.org/GNUHealth_on_openSUSE#Quick_Start
> (as you have already GH installed, after adding the respository you need =
to
> run
> zypper up --allow-vendor-change )
>
> 2) If you install the client in the same virtualbox, can this client conn=
ect
> to the server?
>
> 3) In order to allow the server inside a virtual machine to receive
> connecion requests from a client outside of that machine yo need to:
>
> 3.1) open port 8000 in the firewall (or switch it off *for testing purpos=
es
> only*). Use the firewall module in YaST.
>
> 3.2) Set the network mode of the virtual box to 'Bridged' (normally VBox
> uses NAT as network mode, so the server receives a local address and is n=
ot
> visible from the outside. In bridged mode, it gets an address from the
> DHCP-server in the network)
>
> > >>>>>>> I have two
> > >>>>>>> computers to which I want to connect as client and server for
> > >>>>>>> testing purpose (before implementing in real environment).>
>
> Please try the above and report back!
>
> Best,
> Axel
--
Dr.-Ing. Axel K. Braun
M: +49.173.7003.154
T: -at-coogor
Matrix: -at-docb:matrix.org
PGP Fingerprint: 2E7F 3A19 A4A4 844A 3D09 7656 822D EB64 A3BA 290D
Public Key available at http://www.axxite.com/axel.braun-at-gmx.de.asc
Personal Freedom starts with free/libre Software....
...running openSUSE Leap 15.1
--_000_AM6PR04MB61333B6B8A82EE0BD5DA17E1BBBB0AM6PR04MB6133eurp_
Content-Type: text/html; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
1">
color: rgb(0, 0, 0);">
Hi ALL,
Please, kindly help me to resolve tryton client ap=
plication not connecting to server.
I am new to OpenSUSE and GNU Health.
I followed tutorials/documentation to install GNUH=
ealth on OpenSUSE using virtual box machine.
Everything goes fine until I came to lunch tryton_=
client, then it refused to connect to the server.
Below are my previous threads on the issue.
Regards.
> > 1) use the latest GNU Health and enjoy additional functionality, as >
> described in Quick_Start">
https://en.opensuse.org/GNUHealth_on_openSUSE#Quick_Start
> (as you have already GH installed, after adding the respository you ne=
ed to
> run
> zypper up --allow-vendor-change )
> It seem "version 3.4.1" is the updated version of leap 15.1,=
but I run the
> "zypper up --allow-vendor-change" command.
>
> 2) If you install the client in the same virtualbox, can this client c=
onnect
> to the server?
> I am installing both client/server in VBox, am not sure if they willr>
> communicate. Please, advise me (I am new to Linux/OpenSUSE).
>
> 3) In order to allow the server inside a virtual machine to receive>
> connecion requests from a client outside of that machine yo need to:r>
>
> 3.1) open port 8000 in the firewall (or switch it off *for testing pur=
poses
> only*). Use the firewall module in YaST.
> I try using NAT> Advance> Port forwarding to add 'port8000' in V=
BOX
> settings, which later I switch off the FIREWALL in YaST.
>
> 3.2) Set the network mode of the virtual box to 'Bridged' (normally VB=
ox
> uses NAT as network mode, so the server receives a local address and i=
s not
> visible from the outside. In bridged mode, it gets an address from the=
> DHCP-server in the network)
> I change the 'NAT' as network mode in VBOX settings to "Bridged A=
dapter"
> mode.
>
> Please try the above and report back!
> I review the status of Postgresql Database and Tryton server, all are =
in
> active mode. But when I lunch the "Tryton client" applicatio=
n and click the
> profile manager (after a while), Still it display "Could not conn=
ect to the
> server"
>
> Please, can I share my screen?
>
> Regards,
> Yusuf
>
>
> ________________________________
> From: Axel Braun <axel.braun-at-gmx.de>
> Sent: Friday, May 15, 2020 4:31 PM
> To: Yusif Suleiman <yusifsuleiman-at-hotmail.com>; health-at-gnu.orgr>
> <health-at-gnu.org> Subject: Re: Tryton-server
>
> **** please ask via health-at-gnu.org *****
>
> Am Freitag, 15. Mai 2020, 15:58:30 CEST schrieb Yusif Suleiman:
>
> [...]
>
> > OK...so what versions of GNU Health do you use? What is your base=
system,
> > and are client and server o the same machine?
> >
> > >>>>>>> Am installing gnuhealth client versi=
on 3.4., and I am using
> > >>>>>>> Windows
> > >>>>>>> base systems with virtual box 4GB RA=
M & 20GB HDD.
>
> 1) use the latest GNU Health and enjoy additional functionality, as>
> described in Quick_Start">
https://en.opensuse.org/GNUHealth_on_openSUSE#Quick_Start
> (as you have already GH installed, after adding the respository you ne=
ed to
> run
> zypper up --allow-vendor-change )
>
> 2) If you install the client in the same virtualbox, can this client c=
onnect
> to the server?
>
> 3) In order to allow the server inside a virtual machine to receive>
> connecion requests from a client outside of that machine yo need to:r>
>
> 3.1) open port 8000 in the firewall (or switch it off *for testing pur=
poses
> only*). Use the firewall module in YaST.
>
> 3.2) Set the network mode of the virtual box to 'Bridged' (normally VB=
ox
> uses NAT as network mode, so the server receives a local address and i=
s not
> visible from the outside. In bridged mode, it gets an address from the=
> DHCP-server in the network)
>
> > >>>>>>> I have two
> > >>>>>>> computers to which I want to connect=
as client and server for
> > >>>>>>> testing purpose (before implementing=
in real environment).>
>
> Please try the above and report back!
>
> Best,
> Axel
--
Dr.-Ing. Axel K. Braun
M: +49.173.7003.154
T: -at-coogor
Matrix: -at-docb:matrix.org
PGP Fingerprint: 2E7F 3A19 A4A4 844A 3D09 7656 822D EB64 A3BA 290D
Public Key available at asc">http://www.axxite.com/axel.braun-at-gmx.de.asc
Personal Freedom starts with free/libre Software....
...running openSUSE Leap 15.1
--_000_AM6PR04MB61333B6B8A82EE0BD5DA17E1BBBB0AM6PR04MB6133eurp_--
--===============0133080285==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Hangout mailing list
Hangout-at-nylxs.com
http://lists.mrbrklyn.com/mailman/listinfo/hangout
--===============0133080285==--
|
|
